Location : Bangplee, Samutprakarn
Owner : Kitz(Thailand) Co.,Ltd
Structural Engineer : CASE Co.,Ltd
Architect : CASE Co.,Ltd
Site Area : 3,000 Sq.m.
Project Cost : 15 M.Baht
DesignCompleted : May 1994
Structure : A one storey factory were designed
as flat slab system supported
on piles. They can support a live load of 2,000 ksm. The roof structure was designed as truss covered by corrugated asbestos sheets. Maximum span of truss is 40 metre.
 
 
Location : Eastern Seaboard, Rayong
Owner : Furukawa Unic(Thailand) Co.,Ltd
Structural Engineer : CASE Co.,Ltd
Architect : CASE Co.,Ltd
Site Area : 2,500 Sq.m.
DesignCompleted : June, 1997
Structure : A new factory consists of three main buildings. Main structural members are reinforced concrete while roof trusses are made of structural steel. Shallow foundations without piles are used since the soil condition is rather good.
 
 
Location : Nikhom Pattana, Rayong
Owner : NCR-TRB Industry Co.,Ltd
Structural Engineer : CASE Co.,Ltd
Architect : TPAT Co.,Ltd
Site Area : 2,000 Sq.m.
DesignCompleted : June, 2000
Structure : The main structure is reinforced concrete frame whose slab on ground was designed to withstand live loading of 2,000 kg/m2. The steel roof truss,40 meter span length, was designed to support the corrugated metal sheet roofing. By this long-spanned truss, the below working area will not be obstructed by any internal columns, so the production line can be installed with high flexibility.


 
© Copyright Civil and Structural Engineers Co.,Ltd. All Rights Reserved. Designed by FortunerDesign